Home > Water Ingress Testing Equipment >

GOST 14254 Sand And Dust Test Chamber 2000L For Electronic Products Car

Product Categories

Electric Vehicle Testing Equipment [31]
EVSE Testing Equipment [26]
EV Connector Testing Equipment [87]
EV Battery Testing Equipment [49]
Walk In Environmental Test Chamber [31]
Environmental Test Chamber [52]
Temperature Humidity Test Chamber [26]
Water Ingress Testing Equipment [41]
Flammability Testing Equipment [20]
Electrical Safety Testing Equipment [25]

Sinuo Testing Equipment Co. , Limited

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

GOST 14254 Sand And Dust Test Chamber 2000L For Electronic Products Car

Name: GOST 14254 Sand And Dust Test Chamber 2000L For Electronic Products Car
Brand: Sinuo
Price: 1 USD

GOST 14254 Sand And Dust Test Chamber 2000L For Electronic Products Car Manufactures

Brand Name : Sinuo

Model Number : SN441-2000L

Certification : Calibration Certificate (Cost Additional)

Place of Origin : China

MOQ : 1

Payment Terms : T/T

Supply Ability : 10 Sets Per Month

Delivery Time : 30 Days

Packaging Details : Export packing

Inner chamber effective capacity : 2m³

Nominal wire diameter : ≥50μm

Air flow rate : 1.5 m/s

Product vacuum degree : ≤60KPa

Standard spacing between wires : ≥75μm

Dust concentration : 2～4kg/m3

Inner chamber sizes : 2000*1000*1000mm（W*D*H）

External chamber sizes : 2400*1500*1900 mm（W*D*H）

Contact Now

GOST 14254 Sand And Dust Test Chamber 2000L for Electronic Products Car

Complied Standards & Clauses

Conforms to IEC60529 Fig 2 IP5X and IP6X, GOST 14254-2015 figure 8 and etc.

Product Overview

The test device is suitable for sealing parts and enclosure’s sand and dust resistance capacity testing of the electrical and electronic products, car and motorcycles spare parts and seals. In order to detect the use, storage, transport performance of the electrical and electronic products, car and motorcycles spare parts and seals under the sand and dust environment.
The test equipment uses intelligent and humanized PLC control system, the inner of the test equipment is made of high quality SUS304 stainless steel, the enclosure is A3 plate electrostatic spraying. And it also has large observation window and manual wiper device. The security protection is good.

Technical Parameters

Volume and size
1.1 Inner chamber effective capacity	Approx. 2m³
1.2 Inner chamber sizes	200010001000mm(WDH)
1.3 External chamber sizes	Approx. 240015001900 mm(WDH)
2. Function parameters
2.1 Working room temperature	RT+10℃～+70℃
2.2 Product vacuum degree	≤60KPa
2.3 Dust composition	Talcum powder
2.4 Dust particle composition	Dry talc that can pass through a square mesh sieve with a mesh size of 75µm and a wire diameter of 50µm Additional 32 μm and 250 μm sieves will be offered
2.5 Dust concentration	2～4kg/m³
2.6 Air flow meter	Digital flow meter
2.7 Air flow rate	1.5 m/s (Adjustable range: 0 ~ 4.99 m/s)
2.8 Time Control	Dust blowing control cycle: 1s ~ 99h (adjustable), test time: 1s ~ 99h (adjustable), vibration time: 1S ~ 99H (adjustable)
2.9 Metal Screen	Nominal wire diameter: ≥50μm, standard spacing between wires: ≥75μm.
2.10 Sand and dust air circulation device	The circulating air duct and high-power mixed flow fan have an exhaust volume of 80 times the volume of the sample’s shell, and the exhaust speed does not exceed 60 times the volume of the shell per hour. The air flow speed can make the dust evenly distributed in the test chamber. The air flow in the test chamber is mainly vertical airflow from top to bottom, rather than laminar flow.
2.11 Sample rack	2 pcs -The presence of one shelf with the possibility of installation at different heights, made of perforated stainless steel panels with a load capacity of at least 50 kg -Metal panel of the floor of the test compartment, must provide a load capacity of at least 200 kg
2.12 Dust drying system	The equipment is equipped with a dust drying and heating device. There is a heating button on the controller control screen. When the dust is found to be a little damp during the test, the heating button on the control screen can be turned on to start the dust heating device to dry the dust. The button can be turned off after the dust is dry. The drying process will not affect the test process, effectively ensuring the dust concentration in the test chamber and the accuracy of the test data.
2.13 Dust replacement method	Manually change dust, dust can be easily replaced at any time

Details

Product Tags:

GOST 14254 Sand And Dust Test Chamber 2000L For Electronic Products Car Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Sinuo Testing Equipment Co. , Limited
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

GOST 14254 Sand And Dust Test Chamber 2000L For Electronic Products Car

GOST 14254 Sand And Dust Test Chamber 2000L For Electronic Products Car

2000L Sand And Dust Test Chamber

Car Sand And Dust Test Chamber

Sand And Dust Test Chamber

GOST 14254 Sand And Dust Test Chamber 2000L For Electronic Products Car Images